Yazeka
Arama sonuçlarına göre oluşturuldu
Chicco Next2Me cot installation involves the following steps:
- Lay the base: Place the base "C" on the floor 23.
- Insert the height adjustment frame: Insert the frame "F" and hold the adjustment buttons "F1" outward 23. Push the tubular elements "F2" all the way down until you hear a click 23. Repeat on the other side 2.
- Attach the folding side barrier: Bring the assembled block to point 1 on the folding side barrier "D", engage the tubular elements "F2" at the top and the rectangular hooks at the bottom of the barrier "D" 23.
- Assemble the legs: Assemble the lower tubular element of leg "A1" by inserting it into the hole at the base of the leg "A2" 23. Repeat for the other leg 2.
- Lower the cot: Press the adjustment buttons "F1" to lower the cot completely 2.
- Attach the upper frame: Insert and slide the upper frame "B" into the through-hole of the fabric "H" 23.
- Attach the fabric: Place the fabric on the upper perimeter of the cot, fasten all the snap buttons in the bed base "H1", and close the two internal vertical zippers "H6" 23.
- Secure to the bed: Complete the bed fastening operation by hooking the length adjustment prongs "G2" to the grey bed fastening buckles "C1" located under the base of the product 23.
- Final adjustments: Pull the product completely to the parents' bed, tighten the loop by pulling the straps "G", and ensure that the safety straps "D4" are fully tensioned 2.
Always make sure all locking mechanisms are engaged and the product is stable before use 2.
5 kaynaktan alınan bilgiyle göre: